Digital BW, The Print

Don,
Sounds like one of your inks is not making its way through all the 
nozzles of the print head. Try printing  the "purge" file from MIS, 
without any color management and see if it is confined to one ink. 
It may well be some air in the cartridge. I think that MIS suggests 
three clean cycles on the printer and then printing the purge file 
again. If it does not clear after a few pages them maybe you need to 
prime you cartridge again. Don't give up, the 1160 is worth it.

Nodbo

--- In DigitalBlackandWhiteThePrint@y..., "donbga" <donbryant@w...> 
wrote:
> Today I made my first prints using the MIS/VM inkset on an 1160 
with 
> CFS carts. My only problem that I have observed is micro-banding 
that 
> is most prominent in the dark tone and low mid tone areas of the 
> print. I applied all of the curves created by Paul Roark and the 
> problem was evident in all four prints.
> 
> How should I try to adjust for the micro banding? This is my first 
> attempt at digital inkjet printing so I apologize for what is 
> probably a simple question. The paper is Epson matte heavy weight.
> 
> Thanks,
> 
> Don Bryant