Digital BW, The Print

Are you pumping or sucking? Do you feel resistance when you pull or push the
plunger? Can you see the sides of the black cart depress as you suction out
the air? Are you properly clamping the tube by folding it before
lamping?  -BK

> -----Original Message-----
> From: mike kless [mailto:mgkless@...]
> Sent: Saturday, February 02, 2002 4:05 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: Re: [Digital BW] nomorecarts cis
>
>
> Stock Solutions, aka, Inkjetart.com is the co. that I purchased the cis
> from.  It is the same as nomorecarts system.  The tape on the
> bottom of the
> carts is intact.  I have not touched it.  There are no wholes in
> the tape.
> I have attempted repeatedly to fill the carts by inserting the
> syringe into
> the tube for each of the inks.  I have pumped until I can not
> hear any air
> coming out and then I have pumped some more.  I then use the
> clamp that is
> provided w/ the system to clamp of the tube.  I then insert the tube into
> the ink, put on the cap per the instructions and then release the
> clamp.  At
> this point the ink should flow right into the tube.  It does not.
>  I would
> definitely like to get this system to work.  I would appreciate feedback
> from those who have successfully installed this system. Thanks,  Boris
>
> >From: Todd Flashner <tflash@...>
> >Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> >Subject: Re: [Digital BW] nomorecarts cis
> >Date: Sat, 02 Feb 2002 18:44:31 -0500
> >
> >on 2/2/02 5:48 PM, borismg wrote:
> >
> > > I have repeatedly tried to fill the carts for my 1270.  They will
> > > not fill.  To the best of my knowledge I have followed the directions
> > > on the stock solution website.  I have tried filling different
> > > chambers, all to no avail.  I have been using the clamps that were
> > > sent with the system.  Would appreciate any pertinent feedback.
> > > Thanks, Boris
> >
> >You are trying to use the vacuum method, using the syringe with the flow
> >regulators (or whatever they are really called) as in the instruction
> >manual? If so, something is off in your technique. Perhaps you
> have removed
> >tape from some of the holes so that a vacuum within the cart can not be
> >made?
> >
> >You make mention of stock solutions but provide no link. Please provide
> >more
> >specifics as to the parts you are using and the techniques you are
> >employing
> >and someone may be able to help.
> >
> >Todd
> >
>
>
>
>
> _________________________________________________________________
> Join the world\ufffds largest e-mail service with MSN Hotmail.
> http://www.hotmail.com
>
>
> Please visit the Group Homepage to check the Files, Bookmarks,
> Polls and other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier
> messages to keep them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the
> various resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>