Digital BW, The Print

> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "robert49brake" 
> <robert49brake@> wrote:


> > With the r220 there is a significant difference in a matte print
between  3/4 MK and the 
> > UT3D that I also use.  Not better or worse but distinctly
different. (and a difference I like 
> > depending on the print)  I am curious as to whether or not that
difference will be as 
> > pronounced on the 1800 with its smaller drops.  
> > 

Hello Robert,

I used the 1800 with 3MK and was having the occasional micro banding
issue. I installed a 4th MK cart in the Cyan position (duplicating the
MK curve to the C curve in QTR and reducing the ink loads to 3x 52.5%)
and to my eye the prints seem a little bit better. I have never since
seen micro banding.

Denis Bouchard
www.denisbouchard.ca