Digital BW, The Print

Have you tried the "Thick" setting in the Utilities panel of the 
printer? That seemed to work better for me with 300 gsm Entrada.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "olaf ringdahl" 
<o.ringdahl@...> wrote:
>
 I'm on my third 2400 because of paper feed problems. In every case I 
have been able, for a while, to feed the Silver Rag (300 gsm) but 
rarely without special treatment. With my third machine, a replacement 
refurb, the feed worked well, for a while, but now it refuses to accept 
the Silver Rag in the rear feed, where it belongs, but accepts it, 
grudgingly (requiring a slight nudge) in the top feed. From my 
experience it seems that forcing Silver Rag through the 2400 will, in 
time, damage the feed mechanism. I hope I am wrong. I would like to 
know if others are having the same experience or if my experience is 
just a fluke. Have any of you run a lot of Crane Silver Rag through a 
2400?  What problems, if any, did you encounter? 
> 
> Olaf