Digital BW, The Print

Thanks for your reply. When I begin the process the plunger is at the top of 
the syringe, near the tip, and I pull  back on it to begin and then push it 
forward.  There is resistance when I pull the plunger back. I have not 
noticed any movement on the sides of the black cart. I have clamped the tube 
according to the directions on the inkjetart.com website.  By folding it 
over before clamping, are you saying that I should "double it over" and then 
clamp?  I look forward to your response.  Mike


>From: "Barry Kelsall" <bktimes@...>
>Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
>To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
>Subject: RE: [Digital BW] nomorecarts cis
>Date: Sun, 3 Feb 2002 11:39:39 -0800
>
>Are you pumping or sucking? Do you feel resistance when you pull or push 
>the
>plunger? Can you see the sides of the black cart depress as you suction out
>the air? Are you properly clamping the tube by folding it before
>lamping?  -BK
>
> > -----Original Message-----
> > From: mike kless [mailto:mgkless@...]
> > Sent: Saturday, February 02, 2002 4:05 PM
> > To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > Subject: Re: [Digital BW] nomorecarts cis
> >
> >
> > Stock Solutions, aka, Inkjetart.com is the co. that I purchased the cis
> > from.  It is the same as nomorecarts system.  The tape on the
> > bottom of the
> > carts is intact.  I have not touched it.  There are no wholes in
> > the tape.
> > I have attempted repeatedly to fill the carts by inserting the
> > syringe into
> > the tube for each of the inks.  I have pumped until I can not
> > hear any air
> > coming out and then I have pumped some more.  I then use the
> > clamp that is
> > provided w/ the system to clamp of the tube.  I then insert the tube 
>into
> > the ink, put on the cap per the instructions and then release the
> > clamp.  At
> > this point the ink should flow right into the tube.  It does not.
> >  I would
> > definitely like to get this system to work.  I would appreciate feedback
> > from those who have successfully installed this system. Thanks,  Boris
> >
> > >From: Todd Flashner <tflash@...>
> > >Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > >To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > >Subject: Re: [Digital BW] nomorecarts cis
> > >Date: Sat, 02 Feb 2002 18:44:31 -0500
> > >
> > >on 2/2/02 5:48 PM, borismg wrote:
> > >
> > > > I have repeatedly tried to fill the carts for my 1270.  They will
> > > > not fill.  To the best of my knowledge I have followed the 
>directions
> > > > on the stock solution website.  I have tried filling different
> > > > chambers, all to no avail.  I have been using the clamps that were
> > > > sent with the system.  Would appreciate any pertinent feedback.
> > > > Thanks, Boris
> > >
> > >You are trying to use the vacuum method, using the syringe with the 
>flow
> > >regulators (or whatever they are really called) as in the instruction
> > >manual? If so, something is off in your technique. Perhaps you
> > have removed
> > >tape from some of the holes so that a vacuum within the cart can not be
> > >made?
> > >
> > >You make mention of stock solutions but provide no link. Please provide
> > >more
> > >specifics as to the parts you are using and the techniques you are
> > >employing
> > >and someone may be able to help.
> > >
> > >Todd
> > >
> >
> >
> >
> >
> > _________________________________________________________________
> > Join the world\ufffds largest e-mail service with MSN Hotmail.
> > http://www.hotmail.com
> >
> >
> > Please visit the Group Homepage to check the Files, Bookmarks,
> > Polls and other resources as they are often being updated. The page is 
>at:
> >
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> > Please follow these basic guidelines:
> > - Include your full name with your message.
> > - Include the address of your website, if you have one.
> > - As threads develop, trim off excess portions of earlier
> > messages to keep them short.
> > - As the topic of a thread changes remember to change the subject 
>header.
> > - Good manners are required at all time. No personal attacks or 
>"flames."
> > - Complete your Yahoo profile.
> > - Before posting a question, search the message archives and the
> > various resources on the homepage.
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to 
>http://docs.yahoo.com/info/terms/
> >
> >
>




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx