Thanks for the advice, Duane! I don't know what to do about replacing the Quadtone in the 3000 yet. To get my feet BO wet, I just used the black from the quad in the 1270 because I'm CHEAP!!! I suppose I'll have to mix the quad black myself because MIS is too damn lazy and has abandoned it's hallmark inks. gar *********** REPLY SEPARATOR *********** On 2/6/08 at 12:23 AM dlruckus wrote: >--- In DigitalBlackandWhiteThePrint@...m, "Gary Weaver" ><garww@...> wrote: >> >> Frank, >> >> I don't know about the MIS ink. I would write down part numbers from >the MIS site. Go by the part numbers. You need to know this anyway. >You will want numbers for the Eboni and UT matt so you can be sure >which is which. I'm still using the old quadtone black and it's dated >but not bad. When I finish that off, I'll be going BO eboni for the 1270. >> > >Hi Gary. When you do finish with the old MIS quad black and go to >Eboni it will be a mistake if you just print the cart down and push >Eboni into it. The old quad blacks have some dye in them. Eboni will >gel in the presence of dyes. That will happen in the heads as well as >in the cart. > > -----------Isss baaad juju ;)------------- > >You need to clear the old inks out first including remnants left in >the heads and on the cap station. Hence the recommendation of cleaning >cart first. I believe that, at this point in time, MIS is no longer >selling the old types of ink so there will soon be no choice but to do >this if you want to preserve your printer. (Note: I have two 1200s and >know whereof I speak :) ) > >Regards >Duane > > > > >Please visit the Group Homepage to check the Files, and other resources as >they are often being updated. > >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > >If you wish to receive no emails or just a daily digest, or you wish to >unsubscribe, please edit your Membership preferences by visiting this same >page. > >Please follow these basic guidelines: >- As threads develop, trim off excess portions of earlier messages to keep >them short. >- Good manners are required at all time. No personal attacks or flames. >Hostile, aggressive or argumentative users may be removed from the >membership without notice. >- Keep your posts and threads related to the group topic of digital B&W >printing. Users who persistently make off-topic posts may be removed from >the membership. >- By posting on this forum you agree to abide by the group rules and >guidelines, and to abide by the actions and decisions of the group Owner >and Moderators. See Group Topic, Rules and Guidelines in the Files >section: >http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > >BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT >YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND >MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO >YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR >EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF >PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE >OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN >ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE >OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) >UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) >STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT >YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE >PRINT YAHOO GROUP. > >Yahoo! Groups Links > > >
Message
Re: [Digital BW] Re: Beginner questions
2008-02-06 by Gary Weaver
Attachments
- No local attachments were found for this message.