Are you aligning the paper correctly when it goes in the feed? The right edge of the paper goes against the right side of the tray and the bottom edge is aligned with the white line on the tray. ----- Original Message ----- From: "Derrick" <dcyy71@...> To: <DigitalBlackandWhiteThePrint@yahoogroups.com> Sent: Wednesday, February 27, 2008 2:35 AM Subject: [Digital BW] Harmon Gloss FB AL & Epson 3800 front loading problem Hi, i'm trying to get some A3+ (19x13) prints done urgently on Harmon Gloss FB AL paper using my Epson 3800 via the front manual feeder. I've tried using the rear manual feeder previously which works fine but i'm getting pizza tracks on the darker prints so i switched to the front manual feeder. The problem now is that the print gets chopped off slightly more than a 1/4 of an inch at the top and at the bottom. My image size is 18x12 inches. Under the paper setup, i have a custom paper size set up to 19x13 but with 1/2 inch borders all around. This works fine using the rear feeder but using the front feeder, the sides are ok (1/2 inch border on the left and right) but the top and bottom have a border of slightly more than 3/4 inch (i.e. cutting off my image at the top and bottom). Appreciate any help as i've wasted quite a bit of paper trying to figure out what is wrong. Thanks! Derrick Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
Re: [Digital BW] Harmon Gloss FB AL & Epson 3800 front loading problem
2008-02-27 by Brian Ellis
Attachments
- No local attachments were found for this message.