Digital BW, The Print

I'd flush the system.  Eboni-6 uses a base that MIS (or Image 
Specialists) says is not compatible with UltraChromes and many other 
similar glossy bases.  They've somewhat hedged their statements in the 
sense that I have not heard specifically that it is not compatible with 
the UT glossy base.  However, I did try Eboni-6 with MIS Glop, and I 
had some nozzle problems that I felt were not normal.  In my view there 
is a very good chance Eboni-6 and glop are not compatible.  MIS glop is 
in the UT7 inks, including the LK.  So, I would flush those lines, and 
I would not use the UT7 LK with Eboni-6.  It is a different and likely 
incompatible ink.

Good luck with the system.  

Paul
www.PaulRoark.com 

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Mark McCarvill" 
<espresso_forte@...> wrote:
>
> My 7600 uses UT7, with Eboni K, and the MIS funnel-fill carts.
> 
> I understand that flushing is required when going from Ultrachrome to
> Eboni-6, but what about UT7 to Eboni-6?
> 
> Since the K and LK appear to be the same in both sets, can I assume
> those 2 are fine?
> 
> For the other 5, do I need to get new funnel-fill carts, or can I just
> drain the existing ones, refill with 5 the new inks and run some purge
> patterns until the new inks reach the head?
> 
> Thanks,
> 
> Mark
>