Digital BW, The Print

> ...
> considering Eboni-6 or Carbon-6. I'll probably go with 
> Carbon-6, but 

>I still need to find a supplier of glycerol.

http://store01.prostores.com/servlet/thescienceshop/the-
1704/GLYCERINE-USP-99.7-pct-/Detail 

This is the outfit I've used.  Glycerol, glycerin, and glycerine are 
all the same as far as I can tell.  I'm sure there are many outfits 
that sell it.  By the way, don't try to pull that stuff through a 
syringe needle.  It's too thick.  I use a syringe with a bottom fill 
adapter on it for handling glycerol.

By the way, I fired up my 7500 with Eboni-6 in it after more that a 
month of idlenes.  The nozzle check was perfect.  No other inkset 
I've used has been able to deliver this in that machine.

> I just need someone to post a good Eboni-6 or Carbon-6 QTR 
> profile for Premier Imaging Smooth B&W or even EEM (hint, hint!),

I've been using the Epson driver with "Create ICC-RGB" ICCs in the 
print preview.  The embedded curves are the same for all papers 
(matte only).  That is, this inkset seems to be consistent enough 
that the same curve produces a ramp that is well within linearization 
range.  Linearization is still needed.  (Although, surprisingly, a 
list member with C6 in a 2400 used one of my 2200 C6 ICCs with the 
2400 and it produced a good print.)  The curves I've used are in my 
various C6 or Eboni-6 download zip files.

Paul   
www.PaulRoark.com