Digital BW, The Print

Hi Paul, 

Thanks again for all your hard work.

Do you see the 1400 as being able to support your C-6 inkset?

Scott

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "pr_roark" 
<pr_roark@...> wrote:
>
> My initial testing of the 1400 suggests it's a very good printer.  
QTR 
> ver. 2.6.1 has Black Only profiles for MIS Eboni and UT-RC PK inks 
in 
> it.  (They are just copies of the 260 profiles.)  They appear to be 
> fine.
> 
> The Epson driver prints with a fairly straight ramp with the UT-RC 
inks 
> when Color Controls is set to Gamma 2.2.
> 
> The 260 ICCs are not quite right, however.  I'll make new ones.  
So, 
> the Epson driver appears to be slightly different than the 260, but 
> it's close.
> 
> MIS is NOT supporting this printer with carts yet.  However, the UT-
RC 
> inks work well and bulk inks are sold in the 260 page at 
> http://www.inksupply.com/r260_blackandwhite.cfm 
> 
> So, while it's too soon to get any carts from MIS, the 1400 appears 
to 
> be a very fine B&W printer.  I'll be making ICCs and curves for it 
soon.
> 
> Paul     
> www.PaulRoark.com
>