Digital BW, The Print

Hi Paul, 

Sorry for being ignorant but which one is the air intake plug? There
are 2 plugs a black rubber one with a flap that is at the lower end 
of the cartridge (looking from the top) and a transparent rubber plug
that is above the black flappy plug. 



--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "pr_roark"
<pr_roark@...> wrote:
>
> Be sure the air intake tab or plug has been removed from the MIS 
> cartridge.  
> 
> I have never tested in the compatibility of Eboni with Claria inks.  If 
> there are nozzle problems it could be that the Eboni is having trouble 
> with Claria inks.
> 
> Paul
> www.PaulRoark.com 
> 
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Tingxi Tan" 
> <ttxtan@> wrote:
> >
> > Hi, I am very new to Black & White and inkjet printing in general.
> > Recently I bought an Epson 1400, and ordered the black cartridge from
> > the UT14 inkset to try my hands on BO printing. The ink came today, I
> > swapped out the OEM black cartridge for this UT14 Eboni cartridge and
> > fire up the Epson print test page. The black text turns out very faint
> > and yellowish. I then run a nozzle check and subsequently 3 cleaning
> > cycles. This did nothing to improve the faint and yellowish black
> > text. I am starting to wonder if I made a mistake in not getting the
> > full UT14 inkset. I am sure the experts on this forum can help me out
> > here, any advise on how I can get BO printing working will be
> > wonderful. Thanks.
> >
>