You need to change the chips. I use a sharp knife to shave off the plastic pegs that hold it on. Then they'll pry off easily. I also use a 1/8 inch of tape at the top of the chip to hold it onto the new cart. Be sure it's secure. A cart that is installed or removed with a chip off can wreck the printer by bending the contacts. Paul www.PaulRoark.com --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Ken Alexander <k.alexander@...> wrote: > > OK, just tried it. I guess it sounded good in theory...then harsh reality smacked me in the face. I made the changes to the file, then pulled my yellow cart and replaced it with the MK cart formerly in the glop slot and put my old glop cart back in that slot. > > However, now the printer (correctly) reports that an incorrect cartridge is plugged into the yellow slot. How does one overcome that? > > Ken > > > --- On Tue, 10/21/08, the_des_bois <thedesbois@...> wrote: > > > From: the_des_bois <thedesbois@...> > > Subject: [Digital BW] Re: R1800/3MK - Swapping Cartridge Positions > > To: DigitalBlackandWhiteThePrint@yahoogroups.com > > Received: Tuesday, October 21, 2008, 2:22 AM > > Had the same issue in the past. Eboni in K, MK and GL. > > > > Paul Roark had suggested testing all channels by printing > > the 21-step > > image using a single channel. I realized that MY printer > > had the less > > single channel banding in the Y,M,B and R channels. > > > > So I moved my blacks to the Y, M and B channels, modifying > > the curves > > using the method you describe, only I used QTR curve tool > > instead of > > Notepad. Result when 3 best channels are used: banding is > > gone gone > > and gone! > > > > So short answer: Yes and Yes. > > > > Good luck, > > > > Denis > > > > > > > > > > > > > > > 1. Change LIMIT_Y= [blank] to the value for LIMIT_GL, > > and then set > > LIMIT_GL to [blank] > > > > > > 2. Change UNUSED_INK_3=Y to CURVE_Y= [and cut/paste > > the values from > > the existing CURVE_GL line, and then change > > CURVE_GL="..." to > > UNUSED_INK_8=GL > > > > > > Is my reasoning sound...and is the solution this > > simple? > > > > > > Thanks for any help! > > > > > > Ken > > > > > > > > ------------------------------------ > > > > Please visit the Group Homepage to check the Files, and > > other resources as they are often being updated. > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or > > you wish to unsubscribe, please edit your Membership > > preferences by visiting this same page. > > > > Please follow these basic guidelines: > > - As threads develop, trim off excess portions of earlier > > messages to keep them short. > > - Good manners are required at all time. No personal > > attacks or flames. Hostile, aggressive or argumentative > > users may be removed from the membership without notice. > > - Keep your posts and threads related to the group topic of > > digital B&W printing. Users who persistently make > > off-topic posts may be removed from the membership. > > - By posting on this forum you agree to abide by the group > > rules and guidelines, and to abide by the actions and > > decisions of the group Owner and Moderators. See âGroup > > Topic, Rules and Guidelinesâ in the Files section: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL > > BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND > > AGREE THAT THE âOWNERâ AND âMODERATORSâ OF DIGITAL > > BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY > > DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR > > LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE > > LOSSES (EVEN IF THE âOWNERâ AND âMODERATORSâ OF > > DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE > > POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR > > THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; > > (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR > > TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY > > THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR > > (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT > > YAHOO GROUP. > > Yahoo! Groups Links > > > > > > (Yahoo! ID required) > > > > > > mailto:DigitalBlackandWhiteThePrint-fullfeatured@...m > > > > >
Message
[Digital BW] Re: R1800/3MK - Swapping Cartridge Positions
2008-10-30 by pr_roark
Attachments
- No local attachments were found for this message.