Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

Re: [Digital BW] Re: MIS Inks, Roark Curves - Unable to Make Decent Prints

Re: [Digital BW] Re: MIS Inks, Roark Curves - Unable to Make Decent Prints

2002-04-22 by Brian Ellis

Hi Don - Thanks very much for all the information. I probably should have
called MIS before posting my message because they think the problem is that
I've got a defective color cartridge. They're sending a new one so we'll
see. I've been very impressed with their customer service. Thanks again.
Brian.
----- Original Message -----
From: "randy laskody" <rlphoto@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Monday, April 22, 2002 10:14 AM
Subject: Re: [Digital BW] Re: MIS Inks, Roark Curves - Unable to Make Decent
Prints


> Make sure your carts are seated all the way into the holder.
> Randy
>
> donbga wrote:
> >
> > Brian,
> >
> > I have an 1160 and use the MIS-VM inkset. The problem you are
> > describing sounds like you are missing 1 or more ink flows to the
> > print head. To check for proper ink flow to the carts download the
> > MIS purge pattern zip file an print the 4 color purge pattern without
> > using any curve adjustments. You should have 4 distinct and smooth
> > bars from black to blue grey. If there are any problems it will be
> > obvious here. You should do this before calling MIS.
> >
> > The carts may need to be primed again to get the ink flowing
> > properly. Also be sure you print Paul's new 21step wedge to see how
> > that looks with his curves loaded and applied.
> >
> > Once you have the ink flows verified you will need to evaluate the
> > results from the different curves to see if tweaking is required.
> > I've had problems with low tone posterization with the warm tone
> > curve and to a minor extent with some negatives with all the curves
> > using all the proper settings and paper. I still haven't ironed out
> > all of the problems but I have looked at some very stunning prints
> > made by a friend with his 1160 and the VM inkset.
> >
> > Still even with these problems I've been able to make good prints
> > (not exceptionals prints) so persistence will pay off.
> >
> > Welcome to quad tone printing,
> >
> > Don Bryant
> >
> >
> > Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
> >
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> >
> > Please follow these basic guidelines:
> > - Include your full name with your message.
> > - Include the address of your website, if you have one.
> > - As threads develop, trim off excess portions of earlier messages to
keep them short.
> > - As the topic of a thread changes remember to change the subject
header.
> > - Good manners are required at all time. No personal attacks or
"flames."
> > - Complete your Yahoo profile.
> > - Before posting a question, search the message archives and the various
resources on the homepage.
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
Show quoted textHide quoted text
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.