Randy,
How was the printer running before you installed the CIS and quads?
Was there any banding with the Epson inks? Since the MIS VM is using
the Epson driver same as the Epson inks the banding should have been
the same with both unless something got knocked out of alignment
during the CIS installation.
Is the microbanding visible at normal viewing distances or is this
something you only see with magnification?
Martin Wesley
Randy,
How was the printer running before you installed the CIS and quads?
Was there any banding with the Epson inks? Since the MIS VM is using
the Epson driver same as the Epson inks the banding should have been
the same with both unless something got knocked out of alignment
during the CIS installation.
Is the microbanding visible at normal viewing distances or is this
something you only see with magnification?
Martin Wesley
--- In DigitalBlackandWhiteThePrint@y..., Randy L <rlphoto@a...>
wrote:
> Hi list,
> My 1160/mis quad/varitone/Roark curve/cfs system on archival matte
is
> producing beautiful prints right off the bat. The only problem is
this
> dreaded horizontal micro banding. My nozzle check is perfect and
high
> speed is off. My question is how much does the alignment has to do
with
> horizontal microbanding? I thought it was only for vertical
microbanding
Show quoted textHide quoted text
> which I dont have. What other factors come into play here?
> Thanks, I am stuck.
> Randy Laskody