Hallo,
so far I did install the Win 2000 driver in win XP prof!
Seems to work! OK!
Prints well screen pattern and alignments are very close!
But I can only use the 1 paper back feeder.
Using the front feeder paper just rushes through.
Pressing LF/FF paper do not go into "ready to print" place - - just
rushes through.
Is there a dirty diod or sensor checking the top of the paper?
Where is it if it's the case?
Someone else having this problem.
Hey, I want to go quad with this printer!
(And by the way, can you go quad with this printer in Win XP?)
Leave it for service here in Sweden? (I can get another used printer
for that money!)
Suggestions?
Fiat Lux!
Bo
--- In DigitalBlackandWhiteThePrint@y..., "Bo Wrangborg"
<sm7bxd@y...> wrote:
> Hi,
>
> Thanks Tim!
>
> So far all screens ok - Ink and head is OK!! (Jipiee! So far!)
> (Using the orginal colour carts and ordinary letter size copy
paper.)
>
> *But* the front feeder don't take the paper.
>
> I'm just now using the buttons on the printer for "test prints".
> (LF + ON)!
>
> The front rubber-puller seems to be ok - cleaned them with alcohol.
> So there must be other rubber puller inside??
>
> Two questions (Windows XP):
> 1/Is it ok to use the single sheet backfeeder (I'll anyway do
single
> prints) EEM (EAM that is?) 17"x24"
> 2/ What driver for Win XP (NT driver or Win2000)???
>
> This might be a lucky day??
>
> Regards
> Fiat Lux!
> Bo
>
>
> --- In DigitalBlackandWhiteThePrint@y..., "Tim Spragens"
> <t.spragens@c...> wrote:
> > Hej Bo,
> >
> > Looks like you are asking for (possibly) unnecessary work. If it
> were
> > I, I'd at least try a few nozzle checks to see if I could get the
> ink
> > flowing.
> >
> > Good luck,
> >
> > Tim
> >
> > > Hallo fellows,
> > > I tried on the Epson list but I didn't get it throgh.
> > > But thinking of it - the real QUAD/Specialists seems to be in
> this
> > > forum - so I try this with you.
> > >
> > >
> > > I just got an Epson stylus 3000 for *free*!!!
> > > It has just been standing in a corner in an office for two
years -
>
> > > unused! - Got it in the hunt for a used Epson 3000. Not bad? I
> don't
> > > know. Perhaps it no use trying in getting it going???
> > >
> > >
> > > But:
> > > 1/ It has *not* been in use for two years!!
> > > (Cartriges was in and have not dried out)
> > > 2/ Found the manual on a Epson US-site
> > > 3/ Driver? I got WIN XP pro - no driver for that at Epson.
> > > Use WIN 2000 driver?????)
> > > 5/ Don't dare to start and test the printer - might be totaly
> > > clogged??? How do I reach the heads and pump WINDIX into the
> > > head with a syringe and a tube, for soaking the heads for some
> > > days before testing it.
> > >
> > > For testing I got 2 x 4 orginal Epson cartiges. Should be handy
> for
> > > tests.
> > >
> > > I'm rather handy - how to dismantle the Epson 3000 for cleaning
> > > and "Windexing" the heads.
> > > Have three 1280's (1290 which I did the CFS on myself with
parts
> from
> > > MIS! They works great!)
> > >
> > > Any other tip and trix?
> > >
> > > Have ordered MIS quad inks and emty cartriges and want to give
it
> a
> > > shoot!
> > >
> > > It would be nice if I could do 17x22 B/W QUAD/PIEZO prints with
> it.
> > >
> > > Do you think it's possible to get it going - or shall I buy
> another
> > > used one and have this for spare parts?
> > >
> > > Fiat Lux!
> > > Bo Wrangborg
> > > Sweden
> > >
> > >
> > >
> > >
> > >
> > > Please visit the Group Homepage to check the Files, Bookmarks,
> Polls and other resources as they are often being updated. The page
> is at:
> > >
> > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > >
> > > If you wish to receive no emails or just a daily digest, or you
> wish to unsubscribe, please edit your Membership preferences by
> visiting this same page.
> > >
> > > Please follow these basic guidelines:
> > > - Include your full name with your message.
> > > - Include the address of your website, if you have one.
> > > - As threads develop, trim off excess portions of earlier
> messages to keep them short.
> > > - As the topic of a thread changes remember to change the
subject
> header.
> > > - Good manners are required at all time. No personal attacks or
> &amp;quot;flames.&amp;quot;
> > > - Complete your Yahoo profile.
> > > - Before posting a question, search the message archives and
the
Show quoted textHide quoted text
> various resources on the homepage.
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > --
> > Tim Spragens
> >
> > http://www.borderless-photos.de
> > http://www.borderless-photos.com