Digital BW, The Print

Hi! My name is Lou. After viewing quad prints from the print 
exchange, I decided to try digi bw printing. My friend suggested MIS 
inks. I called and was directed to the original formula, which does 
not seem to work with Paul's curves ( I was impressed with his 
prints). Can anyone suggest a workflow for this combination of ink 
and printer? Any help would be greatly appreciated. Thanks in advance!
PS Next time I will post under my own name.

I believe all the matching workflows are posted / linked on the MIS
site. I've had good luck with the VM inks and Paul's workflow. Same
with FSN inks and the Woolf workflow. But, I still like black only best. 

Bob Michaels

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "elgha2001
<elgha2001@y...>" <elgha2001@y...> wrote:

> Hi! My name is Lou. After viewing quad prints from the print 
> exchange, I decided to try digi bw printing. My friend suggested MIS 
> inks. I called and was directed to the original formula, which does 
> not seem to work with Paul's curves ( I was impressed with his 
> prints). Can anyone suggest a workflow for this combination of ink 
> and printer? Any help would be greatly appreciated. Thanks in advance!
> PS Next time I will post under my own name.

Thank you for the response, I have not found a workflow for an Epson 
3000 printer . Sorry to have left out the printer type.-Lou.
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Bob_Michaels 
<Bob@B...>" <Bob@B...> wrote:
> I believe all the matching workflows are posted / linked on the MIS
> site. I've had good luck with the VM inks and Paul's workflow. Same
> with FSN inks and the Woolf workflow. But, I still like black only 
best. 
> 
> Bob Michaels
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "elgha2001
> <elgha2001@y...>" <elgha2001@y...> wrote:
> > Hi! My name is Lou. After viewing quad prints from the print 
> > exchange, I decided to try digi bw printing. My friend suggested 
MIS 
> > inks. I called and was directed to the original formula, which 
does 
> > not seem to work with Paul's curves ( I was impressed with his 
> > prints). Can anyone suggest a workflow for this combination of 
ink 
> > and printer? Any help would be greatly appreciated. Thanks in 
advance!
> > PS Next time I will post under my own name.