Digital BW, The Print

I am experimenting with the Harrington QuadTone Rip and my Epson 1160 printer 
with MIS FS-N inks. Do someone have curves for this ink/printer combination?

<reklamefoto@m...> wrote:
> I am experimenting with the Harrington QuadTone Rip and my Epson 1160 printer 
> with MIS FS-N inks. Do someone have curves for this ink/printer combination?

Go into the ExampleInks folder and use the 1160-fs profile.

> Go into the ExampleInks folder and use the 1160-fs profile.


Hmm. Have already done that.
The output is looking strange... almost like a negative!!
What could be wrong? 

I have also made a print without any curves... it looked much better, but of course 
needs tuning

Bjorn

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "bjornaagedk" 
<reklamefoto@m...> wrote:
> 
> 
> > Go into the ExampleInks folder and use the 1160-fs profile.
> 
> 
> Hmm. Have already done that.
> The output is looking strange... almost like a negative!!
> What could be wrong? 
> 
> I have also made a print without any curves... it looked much better, but of course 
> needs tuning
> 
> Bjorn

This does sound strange.  Printing out a 21step wedge should be
informative.  If you could email me a scan of this (.jpg would be good),
a scan of an inkseparation page, and the exact profile you are using,
I'll see if I can figure out what's happening on your system.

Roy