Digital BW, The Print

Sorry, I made a mistake in my last post on this subject. The Somerset Velvet
RGB reading was wrong.

The RGB readings of the prints done with Piezo ink on EAM and Somerset
Velvet were as follows:

EAM:  126/130/121

SV:   142/147/142

The scans were of different landscape prints, thus the different average
brightness.  They are both about the same age -- perhaps 6 months old.  Both
have been in dark storage.

Paul
http://www.PaulRoark.com

_____________________

Bob Bollini wrote:

>In the list *Files* section, "Message Related Files", FS-N1-PZO.jpg,
>Paul has placed two prints of a landscape printed with the Piezo
>software using Piezo inks for one image, and a neutral set of his own
>devising for the other. My monitor is calibrated with PhotoCal, and
>the colour prints I get from my 1160 using a ProfilerRGB profiler
>match wonderfully well with the screen image, so I assume the
>impression I have of these two prints is sound. Rich as it is, the
>piezo print bears a distinctly green cast. The other print suits my
>taste very well, but that's not the point. I want only to ask those
>of you who print with the piezo set to look at the prints Paul has
>made available and say whether the piezo fairly represents your
>experience with these inks. Warm is one thing, green is another.

All I can say or put out there what my experience is.  I've had about 4
bathces of Piezo 4 oz. bottles.  All were about the same color.  I used a
CIS but then stopped when my densities started to vary too much.  I now load
Peizo into carts.  I've never, however, had the "green" or other problems
with it to the extent many seem to report on the Piezo list.  So, overall,
I've assumed that my Piezo experience is rather normal.

That said, I do consider the native color of Piezo to be slightly green, and
I do believe that the EAM print that I scanned, and the image I posted is
representative of my Peizo experience.

Paper type certianly does affect color.  Somerset Enhanced is warm.  EAM
I've always considered relatively neutral, but it does have about 1 unit of
green in the paper base according to my scanner.  Somerset Velvet has always
been the non-caoted paper that poepel point to as totally neutral.

Well, my Piezo on Somerset Velvet is certainly less warm than Piezo on EAM,
but the greeness is the same.  Although I did not have exact copies of
prints to compare, here are my RGB reading for EAM and Somerset Velvet with
Piezo ink:

EAM: RGB = 126/130/121

Somerset Velvet: RGB = 145/147/142

So, that is the best evidence I have.  Take it for what is it worth.  I
think the native color of Piezo is slightly green.

Paul
http://www.PaulRoark.com