Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

Re: [Digital BW] Newbie to QTR and QTRgui - Need Help

Re: [Digital BW] Newbie to QTR and QTRgui - Need Help

2004-12-18 by B. Campbell

There is no neutral curve. The idea is that you blend the cool and the warm
to achieve what looks neutral with your printer, paper, and inks. You don't
say what printer and inks you're using. I use an Epson 2200 printer with
Epson color inks except that the black is MIS Eboni. With that printer and
those inks I get  what to my eyes is a basically neutral print on EEM with
"cool" on the left, "warm" on the right, blend at 75, no gamma or ink
adjustments. I don't know about premium glossy, I don't use it.
Show quoted textHide quoted text
----- Original Message ----- 
From: "ldina" <lbdina@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Saturday, December 18, 2004 11:07 AM
Subject: [Digital BW] Newbie to QTR and QTRgui - Need Help





I'm new to QTR and need some very general guidelines on how to set up
the settings to get a decent B&W print.  I have created a grayscale
image in PS with an embedded gamma 2.2 profile.  I have brought it
into ATRgui, and am not sure what settings to use.

I would like some basic settings for printing on EpEnhMatte, and also
on Epson Premium Glossy.  Not sure what paper settings, inkset,
curves, etc, to use.  Also, I don't see a "neutral" curve set (or do
you just select "None"?

Any helpful suggestions would be appreciated.

Thanks, Lou









Please visit the Group Homepage to check the Files, and other resources as
they are often being updated.

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- Good manners are required at all time. No personal attacks or flames.
Hostile, aggressive or argumentative users may be removed from the
membership without notice.
- Keep your posts and threads related to the group topic of digital B&W
printing. Users who persistently make off-topic posts may be removed from
the membership.
- By posting on this forum you agree to abide by the group rules and
guidelines, and to abide by the actions and decisions of the group Owner and
Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/

BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY
DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND
"MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY
TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR
ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY
THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER
MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.

Yahoo! Groups Links

Re: [Digital BW] Newbie to QTR and QTRgui - Need Help

2004-12-18 by ldina

Thanks.  I forgot to mention I'm on a windows XP platform, using an 
Epson 2200 with UC inkset (either pk or mk inks).  

Just trying to figure out the basics of v2.1b using the GUI 
interface.  Seems pretty nice from what little I have done, but I 
don't really understand how all the settings work and what the 
abbreviations are yet.

I'll probably use matte art papers mostly (EpEnhMatte, PhotoRag, Moab 
Entrada, Somerset, etc), but I thought if I asked how to set up a 
print on both matte and glossy papers, I might end up with a better 
understanding of the overall program.  

Any basic pointers are appreciated.

Thanks, Lou 

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "B. Campbell" 
<bellis60@v...> wrote:
> There is no neutral curve. The idea is that you blend the cool and 
the warm
> to achieve what looks neutral with your printer, paper, and inks. 
You don't
> say what printer and inks you're using. I use an Epson 2200 printer 
with
> Epson color inks except that the black is MIS Eboni. With that 
printer and
> those inks I get  what to my eyes is a basically neutral print on 
EEM with
> "cool" on the left, "warm" on the right, blend at 75, no gamma or 
ink
> adjustments. I don't know about premium glossy, I don't use it.
> ----- Original Message ----- 
> From: "ldina" <lbdina@c...>
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Sent: Saturday, December 18, 2004 11:07 AM
> Subject: [Digital BW] Newbie to QTR and QTRgui - Need Help
> 
> 
> 
> 
> 
> I'm new to QTR and need some very general guidelines on how to set 
up
> the settings to get a decent B&W print.  I have created a grayscale
> image in PS with an embedded gamma 2.2 profile.  I have brought it
> into ATRgui, and am not sure what settings to use.
> 
> I would like some basic settings for printing on EpEnhMatte, and 
also
Show quoted textHide quoted text
> on Epson Premium Glossy.  Not sure what paper settings, inkset,
> curves, etc, to use.  Also, I don't see a "neutral" curve set (or do
> you just select "None"?
> 
> Any helpful suggestions would be appreciated.
> 
> Thanks, Lou

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.