Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

Re: [Digital BW] UT2 wrong colors

Re: [Digital BW] UT2 wrong colors

2004-12-22 by sinwen

I may not understand your post but UT2 is a B&W ink set, slightly toned but B&W. So are you talking about some tonal variations ?

Michel
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: px3n120x 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Wednesday, December 22, 2004 11:54 PM
  Subject: [Digital BW] UT2 wrong colors



  I just bought UT2 refills for my printer (CIS) and the colors are way
  different from the previous one (bought less then a year ago). The
  previous refill was slightly different from the one before but not as
  much as this time.
  The culprit is cyan and light cyan which were blue before and now are
  a slightly cold gray. I had to adjust my QTR profiles once before to
  match the new ink but now there is no way to obtain the tones I want. 
  (IncSupply is not very fast with email support so I don't have their
  opinion)
  I noticed lately people complaining about blotchy colors and assumed
  they were doing something wrong, maybe not, maybe the problem is the same.
  Did anyone else experienced with UT2 notice the change in colors or is
  it possible I just got a "bad" set?

  Andu





[Non-text portions of this message have been removed]

Re: UT2 wrong colors

2004-12-23 by px3n120x

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "sinwen" <sinwen@f...> wrote:
> I may not understand your post but UT2 is a B&W ink set, slightly toned but B&W. So are 
you talking about some tonal variations ?

Should've been obvious that after using at least 3 refills I know what UT2 is but yes, I'm 
talking about tonal variations. Actually ink color variations. Cyan used to be a grayish blue 
and light cyan a pale blue, now they are dark gray and light gray.
Since the blue is gone there is no adjustment of cold tones.
Show quoted textHide quoted text
> 
> Michel
> 
>   ----- Original Message ----- 
>   From: px3n120x 
>   To: DigitalBlackandWhiteThePrint@yahoogroups.com 
>   Sent: Wednesday, December 22, 2004 11:54 PM
>   Subject: [Digital BW] UT2 wrong colors
> 
> 
> 
>   I just bought UT2 refills for my printer (CIS) and the colors are way
>   different from the previous one (bought less then a year ago). The
>   previous refill was slightly different from the one before but not as
>   much as this time.
>   The culprit is cyan and light cyan which were blue before and now are
>   a slightly cold gray. I had to adjust my QTR profiles once before to
>   match the new ink but now there is no way to obtain the tones I want. 
>   (IncSupply is not very fast with email support so I don't have their
>   opinion)
>   I noticed lately people complaining about blotchy colors and assumed
>   they were doing something wrong, maybe not, maybe the problem is the same.
>   Did anyone else experienced with UT2 notice the change in colors or is
>   it possible I just got a "bad" set?
> 
>   Andu
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.