Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Thread

UT-3D profiles

UT-3D profiles

2006-05-11 by Paul Roark

A few ICCs and Photoshop curves for the 220 and 2200 and the UT-3D inkset
are posted at http://home1.gte.net/res09aij/UT-3D_Downloads.html

 

I'm experimenting with different shapes of curves, etc.  The increased
flexibility of this system invites such.

 

There are 2 EEM curves, for example, that take slightly different approaches
to how and where to make the transition from the cold paper to the warmest
patch in the deep shadows (around 90%, where the Eboni overwhelms the other
inks but is not as neutral as it gets at 100%).  Curve N-2 spreads the
change out over the entire range, whereas N-1 goes from the cold paper to
more neutral, then stays there until the deep shadows, where we might be
less sensitive to tone changes.  We'll have to see what looks best where.

 

I have not yet posted the usual Readme file on the inkset, but I do have
links to information on my Index at http://home1.gte.net/res09aij/index.htm

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 



[Non-text portions of this message have been removed]

Re: UT-3D profiles

2006-05-11 by edrudolpho

Paul, what dmax are you getting with the UT3D on HPR?

Ed

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@...> 
wrote:
Show quoted textHide quoted text
>
> A few ICCs and Photoshop curves for the 220 and 2200 and the UT-3D inkset
> are posted at http://home1.gte.net/res09aij/UT-3D_Downloads.html
> 
>  
> 
> I'm experimenting with different shapes of curves, etc.  The increased
> flexibility of this system invites such.

RE: [Digital BW] Re: UT-3D profiles

2006-05-11 by Paul Roark

1.69 - 1.73 depending on printer and other random factors.

Paul
www.PaulRoark.com 
Show quoted textHide quoted text
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of
> edrudolpho
> Sent: Wednesday, May 10, 2006 8:28 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: UT-3D profiles
> 
> Paul, what dmax are you getting with the UT3D on HPR?
> 
> Ed
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> <paul.roark@...>
> wrote:
> >
> > A few ICCs and Photoshop curves for the 220 and 2200 and the UT-3D
> inkset
> > are posted at http://home1.gte.net/res09aij/UT-3D_Downloads.html
> >
> >
> >
> > I'm experimenting with different shapes of curves, etc.  The increased
> > flexibility of this system invites such.
> 
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner
> and Moderators. See "Group Topic, Rules and Guidelines" in the Files
> section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO
> YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE
> OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii)
> STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>

[Digital BW] Re: UT-3D profiles

2006-05-11 by edrudolpho

Sorry.  I should have asked this all at once.  Have you tried the new set on any of the new 
fiber-type gloss papers and, if so, what dmax for them?

Ed

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@...> 
wrote:
Show quoted textHide quoted text
>
> 1.69 - 1.73 depending on printer and other random factors.
> 
> Paul
> www.PaulRoark.com 
> 
> > 
> > Paul, what dmax are you getting with the UT3D on HPR?
> > 
> > Ed

RE: [Digital BW] Re: UT-3D profiles

2006-05-11 by Paul Roark

On Crane SR it's getting about 2.25 - 2.31.  See
http://home1.gte.net/res09aij/3D-Comparison.pdf for a graph of the Crane SR
profile.

Paul
www.PaulRoark.com 
Show quoted textHide quoted text
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of
> edrudolpho
> Sent: Wednesday, May 10, 2006 9:43 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: UT-3D profiles
> 
> Sorry.  I should have asked this all at once.  Have you tried the new set
> on any of the new
> fiber-type gloss papers and, if so, what dmax for them?
> 
> Ed
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> <paul.roark@...>
> wrote:
> >
> > 1.69 - 1.73 depending on printer and other random factors.
> >
> > Paul
> > www.PaulRoark.com
> >
> > >
> > > Paul, what dmax are you getting with the UT3D on HPR?
> > >
> > > Ed
> 
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner
> and Moderators. See “Group Topic, Rules and Guidelines” in the Files
> section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE “OWNER” AND
> “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO
> YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> “OWNER” AND “MODERATORS” OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE
> OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii)
> STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>

[Digital BW] Re: UT-3D profiles

2006-05-11 by edrudolpho

Thanks Paul.  :-)  I'd like to give these inks a try when they become available in carts.

Ed

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@...> 
wrote:
Show quoted textHide quoted text
>
> On Crane SR it's getting about 2.25 - 2.31.  See
> http://home1.gte.net/res09aij/3D-Comparison.pdf for a graph of the Crane SR
> profile.
> 
> Paul
> www.PaulRoark.com

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.