Re: [Digital BW] Epson 1160 and MIS/VM and microbanding
2002-02-03 by Jerry Olson
1. Do a few head cleanings. One missing nozzle stripe can cause banding 2. Do a printhead alignment 3. Be sure your printer is set to heavy paper if you are using anything thicker than typing paper. Jerry donbga wrote:
Show quoted textHide quoted text
> > Today I made my first prints using the MIS/VM inkset on an 1160 with > CFS carts. My only problem that I have observed is micro-banding that > is most prominent in the dark tone and low mid tone areas of the > print. I applied all of the curves created by Paul Roark and the > problem was evident in all four prints. > > How should I try to adjust for the micro banding? This is my first > attempt at digital inkjet printing so I apologize for what is > probably a simple question. The paper is Epson matte heavy weight. > > Thanks, > > Don Bryant > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or "flames." > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/