Doepfer

Thomas,

An A-100 PSU shouldn't draw nearly enough current to blow a fuse. Are you
running anything else on the same circuit? Please be aware that other
appliances may run on the same circuit even though they are connected to
another wall outlet in another room.

Kind regards,

Silas

On 4/19/06, controlexsanguinate <garrgal@pacbell.net> wrote:
>
> Phil,
>
> Hello.  Thanks for getting back to me.  It has the PSU2 power supply.
> I had all of the modules tested in the G6 before I bought it.  I'm
> not sure what the total draw of my modules is.  How can I do that?
> Please let me know.
>
> Take care,
> Thomas
>
>
>
> --- In Doepfer_a100@yahoogroups.com, "ph@..." <ph@...> wrote:
> >
> > Hi Thomas,
> > You should probably give a bit more info, which power supply?
> > What's the total power draw of your modules?  I had this happen once
> when I
> > went over the max power. But then it was fine.
> > \best,
> > phil
> >
> >
> >
> > On 4/18/06 7:36 PM, "Control" <garrgal@...> wrote:
> >
> > > Hello,
> > >
> > >     I was hoping someone on this list could help me.  Every time I
> turn
> > > on one of my Doepfer G6s it blows a fuse.  I haven't changed
> anything in
> > > the case.  The modules in the case have been there for about a year.
> > > Any help would be greatly appreciated
> > >
> > >     Take care,
> > >     Thomas
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>


[Non-text portions of this message have been removed]