hello, that sounds very interesting! let me see if i understand what you are thinking: a new module with an analogue to digital converter, with analogue cv/audio inputs that accept the input analogue signals. then the module converts these to digital logic signals(gates from 0 to 5 volts). if we say that in this new module will be an 8-bit converter. (does that means that the A to D converter changes the analogue input to various combinations of 8 bit's-meaning combinations of 0 and 1's / on and off gates?) then we could have each of the 8 bits as digital outputs(0-5volts gate outputs) in the module's front panel and the user could send these 8 digital outputs to various processing modules like the a166 or the a162 gate delay or even the a137, or...... then the processed 8 bits could then be patched again via digital front panel minijack inputs to this new module and be converted by its onboard D to A conveter to analogue signals(cv's and audio)? could this be done? dieter/florian? it sounds like a great idea! so, this could be an analogue/digital hubrid module that would offer the "digitized" sound for processing with the a100 modules(via digital minijack outputs on the front panel). then it would take the processed digitized bits(via its front panel digital minijack inputs) and reconvert them to analogue signals(audio and cv). right? i am waiting for your opinion, dieter and florian, in order for me to create a new poll about that module too(if it could be created...). regards, Bakis. --- bty205236 <andrew.maunder@btinternet.com> wrote: > How about an analogue-digital/digital analogue > converter module which > in between the two stages makes each bit (i.e. 1s, > 2s, 4s, 8s etc) > available for patching on the front panel. This > could open up > possibilities for bit swapping (as seen on the > frostwave sonic > alienator) use with the A-166 dual logic module and > loads of circuit > bending type madness...? should probably include a > limiter in it as > well... > > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > <synth_freak_2000@...> wrote: > > > > ok list, > > it is brainstorm time again! > > if you have any crazy idea about a future exotic > A100 > > module, just say it! > > i'll gather all your ideas during the next two > weeks > > and out of them i'll create some new polls. > > i am waiting... > > best regards, > > Bakis. > > > > > > > > > > Bakis Sirros - Parallel Worlds > > [Doepfer_a100] group owner > > http://www.parallel-worlds-music.com > > http://www.myspace.com/parallelworldsmusic > > http://www.shimarecords.co.uk > > http://www.rubber.gr > > Athens-Greece > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > > > > Bakis Sirros - Parallel Worlds [Doepfer_a100] group owner http://www.parallel-worlds-music.com http://www.myspace.com/parallelworldsmusic http://www.shimarecords.co.uk http://www.rubber.gr Athens-Greece __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Message
Re: [Doepfer_a100] Re: any more ideas for exotic future A100 modules?
2006-05-07 by Bakis Sirros
Attachments
- No local attachments were found for this message.