Doepfer

We had a radio module at the NAMM (for vocoder demo). It was nothing but a
0.99$ FM radio sticked on a A-100 blind panel and a special cable (3.5mm
stereo -> 2 x 3.5mm mono). Unfortunately it did not work in the basement at
the NAMM (this is why we removed the "module" again). Maybe we will have to
book a booth at first floor next year to demonstrate the "radio module" :-)

It is possible to modify the A-118 to use an external signal for the random
section (instead of the noise source). In combination with the new universal
vactrol module A-101-9 the random rate of the A-118 can even be voltage
controlled.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Bakis Sirros
> Gesendet: Montag, 8. Mai 2006 09:55
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] Re: any more ideas for exotic future A100
> modules?
>
>
> hello,
> i remember a while ago that dieter had explain why
> such a radio module would not be reasonable to make.
> dieter?
> regards,
> Bakis.
>
>
>
>
> --- untiedstates <untiedstates@yahoo.com> wrote:
>
> > VC police scanner would be funny... but...
> >
> > what about a radio noise source? For this the signal
> > reception
> > doesn't need to be good.. so no external antenna,
> > but maybe a socket
> > for one if wanted. Manual & VC controlled radio
> > frequency select.
> > AM/FM bands.
> >
> > It could be like the A-118 with a random CV derived
> > from the radio
> > noise signal. Yes, what I'm talking about is
> > utilizing the "static"
> > that you get when a radio is dialed in between
> > stations as the noise.
> >
> > Of course radio stations would be available too if
> > you wanted to add
> > an antenna to strengthen the signal.
> >
> > It could be called "Radioactivity" after the
> > Kraftwerk album (an
> > album that I like a whole lot).
> >
> > I'm serious.
> >
> > --- In Doepfer_a100@yahoogroups.com, "david
> > rothbaum" <david@...>
> > wrote:
> > >
> > > 1)
> > > voltage controlled police scanner.
> > >
> > > a gate signal would trigger the search or scan
> > function.
> > attenuated cv
> > > for squelch, volume and tuning. and stepped pot
> > for frequency
> > ranges
> > > which could also be cv controlled like the 107
> > morphing filter or
> > the
> > > mode cv on the sequencer controller. so you could
> > step through the
> > > ranges triggered by a sequencer, then another gate
> > signal could be
> > > used to scan that bank/range. also if you had
> > storable presets you
> > > could step through specific frequencies controlled
> > by gate signals.
> > > for instance 149-2 could randomly step through say
> > a bank of 100
> > > preset frequencies...
> > >
> >
> >
> >
> >
> >
> >
>
>
> Bakis Sirros - Parallel Worlds
> [Doepfer_a100] group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>