Doepfer

An intermediate solution for DIYs would be to wire the address A0/A1/A2
outputs of the A-154 and the "old" A-155 controller unit to jack sockets as
well as the address inputs of the A-155. It's only mechanics and some wiring
(P.S. we offer unprinted but punched A-180 4HP front panels since 2 weeks
for such applications in addition to the unprinted/punched standard 8HP
panels). Adding protection resistors (~ 1k) to avoid short circuit problems
at the address outputs will be a good idea.

In this way you are able to control the A-155 from the address source you
want.

If there are sufficient inquiries we could manufacture such passive adapter
modules that make the address in- and outputs available at jack sockets.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Florian Anwander
> Gesendet: Dienstag, 9. Mai 2006 16:13
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] any more ideas for exotic future A100
> modules?-> Modular Sequencing System
>
>
> Hi
>
> I think the A154/155 is great, but I'd like to have it more modular.
>
>
> * Clock controlled address counter (= masterclock)
> * CV adress generators (this might be the module Andrew Maunder was
> thinking about when asking for editable digital signals)
> * Possibilities to modify address busses on digital level (partially
> with already existing digital modules could be used)
> * 16 step switch row scanner (=trigger sequencer) with 4bit adress input
> and option for stacking. Should work bidirectional (one input is
> distributed via address to 16 outputs anc vice versa).
> * 16 step potentiometer row scanner (=CV sequencer), all features as the
> switch scanner.
> * Interfaces for the existing A155 and A154.
> * optional relais interface or MIDI-Out-Interface (Dieter could use
> parts from the OEM series).
>
>
> More Ideas to come...
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>