Doepfer

sounds good :-)


--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@...> 
wrote:
>
> An intermediate solution for DIYs would be to wire the address 
A0/A1/A2
> outputs of the A-154 and the "old" A-155 controller unit to jack 
sockets as
> well as the address inputs of the A-155. It's only mechanics and 
some wiring
> (P.S. we offer unprinted but punched A-180 4HP front panels since 2 
weeks
> for such applications in addition to the unprinted/punched standard 
8HP
> panels). Adding protection resistors (~ 1k) to avoid short circuit 
problems
> at the address outputs will be a good idea.
> 
> In this way you are able to control the A-155 from the address 
source you
> want.
> 
> If there are sufficient inquiries we could manufacture such passive 
adapter
> modules that make the address in- and outputs available at jack 
sockets.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Florian 
Anwander
> > Gesendet: Dienstag, 9. Mai 2006 16:13
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: Re: [Doepfer_a100] any more ideas for exotic future A100
> > modules?-> Modular Sequencing System
> >
> >
> > Hi
> >
> > I think the A154/155 is great, but I'd like to have it more 
modular.
> >
> >
> > * Clock controlled address counter (= masterclock)
> > * CV adress generators (this might be the module Andrew Maunder 
was
> > thinking about when asking for editable digital signals)
> > * Possibilities to modify address busses on digital level 
(partially
> > with already existing digital modules could be used)
> > * 16 step switch row scanner (=trigger sequencer) with 4bit 
adress input
> > and option for stacking. Should work bidirectional (one input is
> > distributed via address to 16 outputs anc vice versa).
> > * 16 step potentiometer row scanner (=CV sequencer), all features 
as the
> > switch scanner.
> > * Interfaces for the existing A155 and A154.
> > * optional relais interface or MIDI-Out-Interface (Dieter could 
use
> > parts from the OEM series).
> >
> >
> > More Ideas to come...
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>