Doepfer

This is handy, but a typical DIY project I think.
Make yourself a faderbox, or saw the faderpart of an obsolete mixer.
I would solder pieces of 1 meter wire direct to the faders and then a 
plug
to the other end, that will save on plugs and connectors (on the 
mixer), you never will unplug !
On May 9, 2006, at 22:48, mrb wrote:

>  Hey everyone:
>
>  This may be a *bit* hard to explain, but it's been kicking around in
>  my head for ages, and I planned to manufacture and get rich off it
>  (snicker) but instead, i'll share it and see if anyone else thinks
>  it's viable!
>
>  The Universal Breakout Box module would be a control interface for a
>  "knob box" like the Doepfer Pocket controller, to solve the problem
>  many people like me have with the Doepfer: when it's VERY patchy, it's
>  hard to get in there and turn knobs on the fly.
>
>  The module part of the "system" would be a single wide (4 "channels")
>  or double wide (8 "channels") where each "channel" would consist of an
>  input jack, an attenuator knob, and an output jack.  Any signal path
>  you would like to attenuate manually could be "finely" attenuated with
>  the knob on the panel, and then "coarsely" attenuated with the knob on
>  the breakout box, which would connect to the panel by a cable 
> (serial?).
>
>  This completely passive system (although gain stages, buffers, etc.
>  would be a cool addition) would allow you to have a tabletop box for
>  controlling any parameter of your synth in real time.  The knob of
>  each channel would be "between" the input and output, allowing you to
>  diversely control anything without having to reach in there, possibly
>  knock something out, etc.
>
>  This makin sense?
>
>
>
>
>
> SPONSORED LINKS
> Electronic air filter
> A100
> Midi converter
> Modular system
> Module
>
> YAHOO! GROUPS LINKS
>
> 	▪ 	 Visit your group "Doepfer_a100" on the web.
>  
> 	▪ 	 To unsubscribe from this group, send an email to:
>  Doepfer_a100-unsubscribe@yahoogroups.com
>  
> 	▪ 	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service.
>
>


[Non-text portions of this message have been removed]