Doepfer

> hello florian, dieter,
> so, taking into account the recent email from dieter
> telling how he could make an expansion module to brign
> the a0,a1,a2,a3 addresses of the a154 and a155 clock
> to the front panel, should i, or should i not, create
> a new poll about a modular sequencer?
> regards,
> Bakis.

For the moment I'd recommend a poll concerning an additional front panel
that makes available the address and clock in/outputs of A-154 and A-155 as
this could be realized within a short time provided that there are
sufficient inquiries (because of the initial charges for the pcb and front
panel). Another solution would be a corresponding note on the DIY page if
there are not sufficient inquiries. It's no electronic but only mechanics
(drilling holes into blind panels, screwing sockets to the holes) and wiring
the sockets to the ribbon cables that are normally used to connect A-154 and
A-155.

Best wishes
Dieter Doepfer

P.S. We added a note on the DIY page how to modify the Wasp filter A-124 for
self-oscillation.