Doepfer

hello dieter,
ok, i'll wait for florian's sketch and then make a
poll.
best regards,
Bakis.




--- Dieter Doepfer <hardware@doepfer.de> wrote:

> > hello florian, dieter,
> > so, taking into account the recent email from
> dieter
> > telling how he could make an expansion module to
> brign
> > the a0,a1,a2,a3 addresses of the a154 and a155
> clock
> > to the front panel, should i, or should i not,
> create
> > a new poll about a modular sequencer?
> > regards,
> > Bakis.
> 
> For the moment I'd recommend a poll concerning an
> additional front panel
> that makes available the address and clock
> in/outputs of A-154 and A-155 as
> this could be realized within a short time provided
> that there are
> sufficient inquiries (because of the initial charges
> for the pcb and front
> panel). Another solution would be a corresponding
> note on the DIY page if
> there are not sufficient inquiries. It's no
> electronic but only mechanics
> (drilling holes into blind panels, screwing sockets
> to the holes) and wiring
> the sockets to the ribbon cables that are normally
> used to connect A-154 and
> A-155.
> 
> Best wishes
> Dieter Doepfer
> 
> P.S. We added a note on the DIY page how to modify
> the Wasp filter A-124 for
> self-oscillation.
> 
> 


Bakis Sirros - Parallel Worlds
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com