Doepfer

It seems that there's something wrong with the exponential converter. Please
send the module for repair/service to your distributor. If you are a bit
experienced with electronics you could try to find the problem yourself
(maybe only a solder jumper is missing). In this case please contact me
directly (hardware@doepfer.de).

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von deastman2
> Gesendet: Donnerstag, 25. Mai 2006 07:56
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Problem with A-141 VCADSR
>
>
> I just picked up a used A-141 VCADSR from my Doepfer distributor, and
> something is not quite right.  The pots for manual ADSR control all
> jump from completely off to completely on over the space of about 2
> degrees of pot rotation.  Also, fully enabling a CV input and
> controlling any stage with an external CV source results in the same
> behavior.  Is there anything I can do to correct this, or should I just
> send the module in for servicing?
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>