Doepfer

Yes, but I'm using a Doepfer cable and plugging the module into one of
the RS-15's Doepfer socket. The socket is keyed, so there's no chance
of plugging the cable in backward.


--- In Doepfer_a100@yahoogroups.com, "ilanode" <techmeier@...> wrote:
>
> Sorry, if this is too easy: Are you aware that ASys and Doepfer are 
> using a different pin assignment for their power connecters?
> 
> --- In Doepfer_a100@yahoogroups.com, "ferlbahoo" <mr.scappy@> 
> wrote:
> >
> > Hi Everyone,
> > 
> > I purchased a Doepfer A-113 Subharmonic Generator on eBay from 
> what I
> > believe is a reliable seller. I plugged the unit into a new 
> Analogue
> > Systems RS-15 case (I'll never buy another -- too unpredictable) 
> along
> > with some other modules, including a pair of VCAs. Everything 
> powered
> > up fine. 
> > 
> > I plugged a cord from the VCA to my mixer, and the LEDs on the A-
> 113
> > dimmed. (The A-113 was NOT patched to the VCA or any module, for 
> that
> > matter.) I plugged another cable to another VCA, and the LEDs 
> dimmed
> > even more. Then they went out, never to return. 
> > 
> > The A-113 doesn't work now. For what it's worth, the VCAs were 
> sharing
> > the same power bus with the A-113. A couple of bus fuses blew when 
> the
> > A-113 went, but it seems that this didn't protect the A-113 from 
> damage.
> > 
> > Any ideas what happened? Any suggestions on what's wrong with the
> > A-113? I'm truly bummed out.  
> > 
> > Ferlbahoo
> >
>