Doepfer

Sorry, if this is too easy: Are you aware that ASys and Doepfer are 
using a different pin assignment for their power connecters?

--- In Doepfer_a100@yahoogroups.com, "ferlbahoo" <mr.scappy@...> 
wrote:
>
> Hi Everyone,
> 
> I purchased a Doepfer A-113 Subharmonic Generator on eBay from 
what I
> believe is a reliable seller. I plugged the unit into a new 
Analogue
> Systems RS-15 case (I'll never buy another -- too unpredictable) 
along
> with some other modules, including a pair of VCAs. Everything 
powered
> up fine. 
> 
> I plugged a cord from the VCA to my mixer, and the LEDs on the A-
113
> dimmed. (The A-113 was NOT patched to the VCA or any module, for 
that
> matter.) I plugged another cable to another VCA, and the LEDs 
dimmed
> even more. Then they went out, never to return. 
> 
> The A-113 doesn't work now. For what it's worth, the VCAs were 
sharing
> the same power bus with the A-113. A couple of bus fuses blew when 
the
> A-113 went, but it seems that this didn't protect the A-113 from 
damage.
> 
> Any ideas what happened? Any suggestions on what's wrong with the
> A-113? I'm truly bummed out.  
> 
> Ferlbahoo
>