Doepfer

I'd recommed to look at the MCV4 manual (no typing error, I really mean
"MCV4"). The MCV4 manual describes the different key assign modes in detail
and how they are programmed via Midi program change messages while the
MS-404/MCV4 is in the learn mode.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von markkono13
> Gesendet: Mittwoch, 28. Juni 2006 02:24
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: ms404 only playing one tone across
>
>
> --- In Doepfer_a100@yahoogroups.com, "Dimitri Pike"
> <wildtek.concept@...> wrote:
> >
> > I remember that I had the same problem a while ago.
> >
> > I read again in details the MS-404 manual two or three times and
> > finally found that I was wrong when sending program changes to the
> MS-
> > 404.
> >
> > If this can help you to solve this problem, try to send these PRG
> > changes to your MS-404 :
> >
> > Key Assign Mode 'Highest Note' : PRG 15
> > Key Assign Mode 'Last Note' : PRG 16
> > Key Assign Mode 'reference note' : PRG 17
> > Key Assign Mode 'Stack Note' : PRG 18
> >
> > Dimitri
> >
> Hey Dimitri-
> Thanks for your input.  As I said, I'm not that versed in midi
> however I have been able to put it in learn mode and at least make
> lowest note.  Other than that I don't know how to do what you are
> suggesting above i.e. Key Assign Mode, etc..  I do appreciate your
> help.  If there is anything else you can think of I'd like to hear.
> p.s. I'm using either a Yamaha AN1X or a Nordlead 2 if that helps.
> regards, Mark
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>