Doepfer

On Thu, 29 Jun 2006, Julian wrote:

> I have a loom comming out of the back of my kenton pro2000 and to a
> faceplate on my modular ( http://port23.co.uk/kenton.jpg )  I have two
> outputs for the Gates and the CVs from each channel (effectivly just a
> multiple) and ive never had any issues.  This is, however, a different
> kenton unit from that of which you are using.

FWIW, I've seen this problem patching clock out from my doepfer a190 
through a mult. If you buffer the signal you're having trouble with 
(either via an asys buffered mult, using a bus access module, or running 
it through a channel on the gate delay module) you should be able to get 
up and running again.

-Brandon