Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Switch converter Module

2006-07-03 by Florian Anwander

Hi Bakis,

here comes my description for the poll. Compared to my former suggestion 
I added a small additional feature: a reed-relais out. Usually switches 
are realized by transistors that shorten the connections. There may be 
gear (guitar-amps, dimmerpacks) that requires galvanic separation and/or 
higher loads, which cannot be provided by simple transistors. So a 
switching over relais might be required. But this would be an additional 
feature.


Bakis Sirros wrote:
> so, florian, please tell me a simple and
> understandable poll that i should create about such a
> "switch converter module". 

Should Doepfer make a module that features the conversion between 
voltage based gate signals and switched keycontrol connections.

General purpose: interface switched gear (like some Moog and Korg 
synths, footswitch controlers etc.) with voltage based gate gear (like 
A-100, Roland synths,...)

Connectors:
- "Gate in tip" (3,5mm)
- "Gate in ring" (3,5mm) connected via socket switch to
   the inverted signal of "Gate in tip"
- "Gate out" (3,5mm)
- "Switched socket in" (2-poles 6,3mmm)
- "Switched socket out" (3-poles 6,3mmm)
Manual switch:
- "Gate out inverted/not-inverted"

Functions:
- closed connection bewteen tip and shaft of "Switched socket in"
   produces logical high signal (10V) at gate out (if manual switch is
   set to not-inverted), open connection between tip and shaft of
   "Switched socket in" produces logical low signal (10V) at gate out.
- logical high signal (>0.5V) at "gate in tip", nothing connected
   to "gate in ring", causes the connection tip/shaft to be closed
   and the connection ring/shaft to be opened.
- logical low at "gate in tip" causes the inverted setting of tip/shaft-
   and ring/shaft connections.
- inserting a cable to "Gate in ring" causes a separate control for the
   ring/shaft conection of "Switched socket out".


Possible addon:
- real switches (reed-relais) instead of transistor switching for
   the "Switched out socket"



Question
[ ] We don't need such a module.
[ ] I would buy the version without the reed-relais addon.
[ ] I would buy the version whith the reed-relais addon.
[ ] I would not buy such a module, but I think other people
     might need it.



Best regards, Florian

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.