Doepfer

hello dieter,
well, i would want such a module, as i have an old
preset drum machine and also old korg strings
(PE1000)and tape echoes that have many foot-switch
jack inputs.
best regards,
bakis.



--- Dieter Doepfer <hardware@doepfer.de> wrote:

> Most of these function can be realized with a
> slightly modified A-175, A-177
> and A-181 (please refer to the DIY page 4.2.6.). I'm
> not sure if a separate
> module is necessary. But if there are sufficient
> inquiries such a module
> would be no problem for us. It's very simple.
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag
> von Bakis Sirros
> > Gesendet: Dienstag, 27. Juni 2006 19:10
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: Re: [Doepfer_a100] Switch converter
> Module
> >
> >
> > so, florian, please tell me a simple and
> > understandable poll that i should create about
> such a
> > "switch converter module". as fas as i understand,
> it
> > will be a module that can "connect" the 0 to 5
> volts
> > gate outputs of the a100 with some of the inputs
> of
> > various monosynths and drum machines that require
> a
> > "switch"(either on or off) type foot pedal, am i
> > right? i think that my korg minipops 120 required
> such
> > pedals...
> > thanks,
> > Bakis.
> >
> >
> >
> >
> > --- Florian Anwander <Florian.Anwander@consol.de>
> > wrote:
> >
> > > Hi Steven
> > >
> > > > I think it would be a great idea to allow
> people
> > > with
> > > > older Moog equipment to interface easily.
> > > I confirm this. And it is not only Moog
> equipment
> > > which matters here.
> > > There is a lot of gear which offers or expects
> > > switched out/inputs. In
> > > my equipment beside my Moogs: the MonoPoly
> > > arpeggiator clock, several
> > > roland start/stop foot connectors, lots of foot
> > > pedals connectors of
> > > digital effects!
> > >
> > > A switch-gate to voltage-gate for both
> directions
> > > would be great.
> > >
> > > And one addition from my side: The
> voltage-to-switch
> > > part should also
> > > contain not only a on/off but also a flip switch
> > > connection like:
> > > - output as stereo jack socket
> > > - 0 volt connects shaft and ring
> > > - 5 volt connects shaft and tip
> > >
> > > Best regards, Florian
> > >
> > >
> >
> >
> > Bakis Sirros - Parallel Worlds
> > [Doepfer_a100] group owner
> > http://www.parallel-worlds-music.com
> > http://www.myspace.com/parallelworldsmusic
> > http://www.shimarecords.co.uk
> > http://www.rubber.gr
> > Athens-Greece
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> 
> 
> 
> 


Bakis Sirros - Parallel Worlds
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com