Hi Dieter > This would require a hardware modification of the SH-101. I'd recommend this > only for users who are experienced with electronics and soldering. You have > to get the SH-101 schematics and find out the solder point of the SH-101 > that has available the rectangle output of the VCO, and add a buffer and a > socket to your SH-101. If I understand you right this is the description of a SH-101 as Sync Master! This would be also possible with the plain line out of the SH-101 (Osc to narrow pulse, no subosc, Cutoff 100%) and a A-119 (or assumingly any buffer like module like A167,A175,...). But as I understand the original poster asked for using the SH-101 as Sync-Slave. This would really require modifying the SH-101. Florian > > Best wishes > Dieter Doepfer > > >>-----Ursprüngliche Nachricht----- >>Von: Doepfer_a100@yahoogroups.com >>[mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von beatboxgestapo >>Gesendet: Sonntag, 23. Juli 2006 00:11 >>An: Doepfer_a100@yahoogroups.com >>Betreff: [Doepfer_a100] Roland Sh-101 and Doepfer VCO sync >> >> >>Hello, >> >> Does anyone have any ideas about the best way to sync the VCO of a >>Roland Sh-101 to the two A-110 VCOs of a Doepfer system? >>Any input is much appreciated. >> >> >>Thank you, >>Beatboxgestapo >> >> >> >> >> >> >> >> >>Yahoo! Groups Links >> >> >> >> >> >> >> > > > > > > > Yahoo! Groups Links > > > > > > -- Florian Anwander |ConSol Tel. +49(89)45841-133 |Consulting&Solutions Software GmbH Fax +49(89)45841-111 |Franziskanerstr. 38, D-81669 München email: florian.anwander@consol.de |http://www.consol.de
Message
Re: AW: [Doepfer_a100] Roland Sh-101 and Doepfer VCO sync
2006-07-24 by Florian Anwander