Doepfer

Jack,

you find a detailed description of the front panel measures on our website:
www.doepfer.com > PRODUCTS > A-100 > Mechanical details.

For the printing a font called "Avant Garde" is used. As far as I know
that's a Windows standard font.

Concerning the measures within a front panel: the standard vertical distance
between the (normally 5) potentiometers or sockets is 20.32 mm. Even the
horizontal distance between sockets and potentiometers is 20.32 mm. But this
is valid only for standard front panels (e.g. A-120, A-122, A-130, A-131,
A-138 and similar). For special front panels (e.g. A-113, A-107) the
measures are different. If mainly sockets are on the front panel (e.g.
A-180, A-160, A-161) the vertical distance is 13.55 mm.

Best regards
Dieter Doepfer
Doepfer Musikelektronik GmbH
Email address: hardware@doepfer.de
Web Site: www.doepfer.com




> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von izimizam
> Gesendet: Montag, 24. Juli 2006 22:20
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] re: Doepfer style front panels
>
>
> Hi everyone
>
>                 i need some advice on taking some modules i have in
> eurorack format (but with very dodgy custom painted panels)  but i want
> to make the front panels identical to doepfer stylisation  , using
> there font and the same aluminium ? can anyone advise on the font and
> how i would do this.The modules i have are euro rack and the same
> voltage but  my idea was to remove the old home made panels and have
> some doepfer stylised ones made (so they fit in with my system)
>
> Can anyone advise on the process ? whats the best way to do this ,
> measure the panels and then convert in something like front panel
> designer ?and order them or ordeer blanking panels ? and diy ? is there
> one stop solution ?
>
> cheers
>
> jack
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>