Doepfer

Kaali,

I'm not dealing with sales. Please contact our sales office
(sales@doepfer.de). They will tell you if we ship to Finland directly or if
there is a representative.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von kaalimus
> Gesendet: Donnerstag, 28. September 2006 20:13
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: Introduction and some questions
>
>
> Hi Dieter,
>
>
> I do have a professionally trained electrician friend who will do the
> wiring for me. Connections for four busses is enough, any more and
> the modules would propably be too much for the PSU.
>
> I hope this message gets through, i have tried to respond to the
> other guy for the whole day, but my post always ends up in an error.
>
> In the email that i sent to you, i asked if you ship to finland and
> how much does it costs. I still haven't gotten an answer, could you
> answer it here? Thomann doesn't have some of the modules i might
> want, so it's kind of hard to order them from there.
>
>
> Regards,
> Kaali
>
> --- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
> >
> > > My plan is to make my own wooden cabinet for the synth and use the
> > > power inlet and the powerunit itself for powering the rest of the
> > > cabinet. Is this possible? How many extra busses can be wired to
> the
> > > PSU if i won't go over the current(1200mA) limit? Don't worry, i
> got
> > > a friend who is an pro-electrician who will do my wiring. Just
> asking
> > > these questions to be safe in my investment. If i can't wire more
> > > busses and modules for the PSU in the Basic System, then the price
> > > will not seem that great anymore as the frame might get useless.
> > >
> > >
> > > Well, i'm off to bed now. Thanks for any and all answers.
> > >
> > > Regards,
> > > Kaali
> >
> >
> > Kaali,
> >
> > you can order the PSU and bus boards as spare parts. But wiring of
> the PSU
> > is allowed only for experts. As these works affects parts, pc
> boards and
> > cables that conduct mains voltage (230/115V) carrying out of these
> works is
> > allowed only for experts or authorized personnel who are familiar
> with all
> > valid safety rules.  Laymen are not allowed to carry out these
> works !
> > Danger to Life !
> >
> > (I know it's boring to repeat this remark again and again but it's
> > essential)
> >
> > For details please visit our website www.doepfer.com > FAQ > A-100
> > Wiring
> > the mains inlet, the power supply board and the bus boards
> (English, for
> > experts only)
> >
> > The PSU2 has flat connectors for up to 4 bus boards available. The
> cables to
> > connect the PSU2 with the bus boards are included with the bus
> boards (3
> > wires with flat connectors on both ends, length about 30cm). For
> details
> > please look at the A-100 accessories page of our website:
> www.doepfer.com >
> > PRODUCTS > A-100 > Accessories
> >
> > Best wishes
> > Dieter Doepfer
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>