Doepfer

Very strange behaviour. I'm not the A-190 specialist in the company.
Matthias Marass is the man who is responsible for final check and repair of
the A-190. You may contact him directly: keyboards@doepfer.de. Maybe he has
an idea what can be done before sending in the device for repair.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von maise3000
> Gesendet: Montag, 9. Oktober 2006 15:41
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: A-190 trouble
>
>
> hello Dieter Doepfer,
>
> the gate LED does not work...
> the cv output does work.
> Midi settings are correct (i tried every channel...)
> my a-110 is getting voltage from the bus (CV), but my adsr has no
> jumper (so i don´t know).
> it seems there is no gate-function at all.
> clock works as it should.
>
> thanks for the help...
> best regards
> maise
>
> > Questions for further help:
> >
> > Does the Gate LED work ?
> > Does the CV output work ?
> > Have you tried to change the Midi channel (of the Midi
> transmitter or the
> > A-190) ?
> > Is the bus connection (CV and Gate) of the A-190 interrupted ? This is
> > required only if another module that accesses the bus is used
> on the same
> > bus board (e.g. A-185) ?
> >
> > If the Gate LED and the CV output are working but there is no
> Gate output
> > the module has probably to be repaired (provided that no other
> module has
> > access to same the bus).
> >
> > Best wishes
> > Dieter Doepfer
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Doepfer_a100@yahoogroups.com
> > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von maise3000
> > > Gesendet: Montag, 9. Oktober 2006 09:42
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] A-190 trouble
> > >
> > >
> > > hello everybody,
> > > i have some troubles with my A-190, maybe someone can help me...
> > > the problem is:
> > > my a-190 doesn´t give any gate information...
> > > the clock and the reset function are still working, but there is
> > > no other midi-information
> > > given to the outputs.
> > > is the another way to reset it (not mentioned in the manual-pdf) ?
> > > if not what chip(s) do i have to change?
> > > any advice would be very helpfull...
> > > thanks
> > > maise
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>