Doepfer

It certainly does appear that you are rectifying the crap out of those
waves!

>
> As promised,  I have uploaded some oscilloscope screen shots from my
> breadboarded. They are located in the Wave Rectifier folder of the
> files section.  The input signal in the shots  is a 1.5kHz 10Vp-p sine
> wave. The offset control in the gven examples was set such that
> rectification occurs around approx +2.5V rather than 0V.
> 
> There is also a quick mock-up front panel showing what controls and
> connections I propose to put on the module if and when I decide to
> manufacture it. This was a cut and paste job from module images on the
> doepfer website and is meant as an indicator only since it would be
> very wrong for me to produce a module that looks exactly like a
> doepfer one.
> 
> Dieter, I would be interested in the schematics of the A-136 merely to
> check out the modifications you suggested.
> 
> Jari,I will put through my A-136  through it's paces if I get time
> later this week (unless somebody else beats me to it).
> 
> Cheers,
> Adam-V.
>