Doepfer

Dieter,
 
that would be interesting as it would save me daisy chaining mixers and
loosing an i/p
 
david
 
David Salter
Senior Consultant
PSG 

Reuters Messaging: david.salter.reuters.com@reuters.net
(t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 

Get the latest news at Reuters.com <http://www.reuters.com/> 

 

________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of hardware@doepfer.de
Sent: 13 November 2006 10:51
To: Doepfer_a100@yahoogroups.com
Subject: AW: [Doepfer_a100] Re: 8 channel cv mixer



> Hello
>
> I use two 4 channels mixers... A138a and A138c... it somehow
> makes like a cheap 8 steps
> sequencer... but it works... if you use the resets function from
> the A160 and A147 (as a
> clock).. you can have quite some good fun... using the outputs
> from A149-2 to reset
> also...
>
> but I also sometimes thought about an 8 channels mixer... but
> then you have A155 sequencer already...

All mixers A-138a/b/c can be expanded to 8/12/16... channel mixers very
easily. I could add a corrensponding remark to the DIY page if somebody
is
interested (but most details are already available on the DIY page -
exept
the corresponing solder points on the boards of A-138a/b/c).

Best wishes
Dieter Doepfer



 


This email was sent to you by Reuters, the global news and information company. 
To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd.



[Non-text portions of this message have been removed]