Doepfer

Thanks for the assign mode tip, i actually read the manual a couple 
of times, and thought that wouldn't do the trick. Well, it didn't do 
the trick completely as it only works when the note kept is lower.

The last note mode sounds like it should be doing what i want it to 
do, but it does not. Maybe the correct mode would be a "first note 
priority", if there was such as mode.

--
K

--- In Doepfer_a100@yahoogroups.com, "Silas Johansen" <sijodk@...> 
wrote:
>
> My A110's require the tuning knob to be in different positions for 
them to
> be in tune. I assume this is normal.
> 
> Your second question is answered on page 15 (Assign mode) of the 
A190
> manual, available at http://www.doepfer.de/a100_man/A190_man.pdf
> 
> Cheers,
> 
> Silas
> 
> On 11/16/06, kaalimus <v@pp.inet.fi> wrote:
> >
> >   Hi,
> >
> > Two questions, both might have been anwered on this board already,
> > but i couldn't find anything definite by searching.
> >
> > The first question is about tuning. I have two A-110 VCOs. What is
> > the supposed neutral setting for the Tune knob, if there is one? I
> > have to tune it to a bit over 8, to get a proper tune. Tracking 
works
> > fine.
> >
> > The second question, is there a way to set the A-190 MCVS to work
> > like this: If i press C3 on my keyboard, keep it down and press C4
> > simultaneously, then release C4 while holding the C3, and the 
synth
> > should play C3 again. This is how my other synths work.
> >
> > Thanks.
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>