Doepfer

The A-134 is a voltage controlled crossfader and can be controlled e.g. from
an external crossfader or modulation wheel that simply generates the control
voltage for the A134.
Best wishes
Dieter Doepfer


  -----Ursprüngliche Nachricht-----
  Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]Im
Auftrag von appliancide
  Gesendet: Samstag, 25. November 2006 01:11
  An: Doepfer_a100@yahoogroups.com
  Betreff: [Doepfer_a100] Re: New poll for Doepfer_a100


  I think this would be a great module if it were a bit more flexible
  and performance-oriented.
  CV in for the crossfader would be nice. CV ins for all of the ins and
  outs would be awesome.
  Transform buttons, like the ones on DJ mixers, would be a nice touch
  for live use/mixing. A gate option here would add a lot of flexibility
  to the module.
  I would also be willing to sacrifice a little extra cash as well as
  some panel space for a better/bigger crossfader. A modulation wheel or
  removable crossfader (again borrowing from a DJ mixer) would be cool.

  Would this also work as a cv mixer or is that not possible?

  Anyways, long story short, I would like to see this module do as much
  as possible.

  Cheers
  Paul

  --- In Doepfer_a100@yahoogroups.com, Doepfer_a100@yahoogroups.com wrote:
  >
  >
  > Enter your vote today! A new poll has been created for the
  > Doepfer_a100 group:
  >
  > How would you like the forthcoming A138d crossfader module to be
  realized? [for a suggested module sketch look here:
  > http://www.doepfer.de/a138d.htm ] regarding your options to choose
  from: 1. A complete module similar to the suggested A-138d
  >
  > 2. An expansion module that has to be connected to an existing A-138
  (a or
  > b). This would be a little bit cheaper as the electronics of the
  A-138 can
  > be used (but not much as the electromechanical parts remain the same
  and the
  > electronics is not very expensive). For this solution the single outputs
  > would not be available and a little bit of soldering is necessary (2
  wires
  > have to be soldered to the A-138). I don't think that this solution is
  > meaningful.
  >
  > 3. same as 2. but only as a DIY project. It's very simple. Most of
  the work
  > will be the front panel processing. The "electronics" is only a few
  > resistors some potentiometers. I can publish the schematics on the
  A-100 DIY
  > page.
  >
  >
  > o option 1.
  > o option 2.
  > o option 3.
  >
  >
  > To vote, please visit the following web page:
  > http://groups.yahoo.com/group/Doepfer_a100/surveys?id=12471627
  >
  > Note: Please do not reply to this message. Poll votes are
  > not collected via email. To vote, you must go to the Yahoo! Groups
  > web site listed above.
  >
  > Thanks!
  >



  


[Non-text portions of this message have been removed]