Doepfer

> Hello all,
>
> Could anyone tell me what kind of screws (and possible additional
> parts) I need for installing the Proma-rails in a wooden case? The
> local Proma-dealer just told me, that I need to get them in a
> DIY-store, but not what kind of screws and other parts I need...
>
> Thank you a lot,
> -Michael

Finally it depends upon your construction. But normally two M5x20
self-tapping screws for each 19" rail (one on each end) are sufficient.
That's how the rails are mounted in our A-100 suitcases. For details please
look at the ProMa catalogue:

http://www.proma-technologie.com/englisch/rundum_l/produkte/19zoll/pdf/tprof
_e1.pdf

This document shows all parts needed to built your own case. The screws are
listed on page 2 item (5), Item no.: 469 050 0206

Best wishes
Dieter Doepfer

P.S. Early next year we will offer a so-called "A-100 DIY kit". It will
probably include these parts:

DIY power supply (same specs as PSU2 but with an external transformer for
safety reasons, no access to dangerous voltage for the DIY customer)
1 or 2 bus boards
2 or 4 angled rails 84HP with M3 threads
cables to connect the bus boards to the power supply
assembly instructions (example a for a wooden case with all dimensions for
the additonally required wooden boards you have to purchase e.g. in your
local hardware store), boring template for drilling the holes for the power
supply and the bus boards

The estimated price will be in the Euro 100 range (with 1 bus board and 2
rails) or Euro 130 range (with 2 bus boards and 2 rails). Details, pictures,
prices and delivery dates coming soon.