Doepfer

dieter, thanks for the research.  i think i'll look into buying the 
mini-power supply and swapping out the heat sinks.  

-tom

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>

> Tom,
> 
> I have good news for you. We have a module arrangement with 220 mA 
current
> consumption connected to the A-100 miniature power supply/bus (with 
larger
> heat sinks) for two days and the temperature of the heat sinks is 
much less
> than 70 degrees. The modules are built into a "beauty case". From 
the next
> production series the A-100 miniature power supply/bus will be 
manufactured
> with the new heat sinks to obtain 200mA max. current (to be on the 
safe side
> we will guarantee only 200mA, even if probably 250 mA would work as 
well).
> For existing A-100 miniature power supplies the heat sinks can be 
replaced
> very easily.
> 
> We expect the first batch of the DIY power supply #1 early in 
March. The low
> cost version with two 12V wall outlet power supplies will be 
available about
> one month later.
> 
> Best wishes
> Dieter Doepfer
>