Doepfer

hello to all - 
i recently traded for an a-110 vco (thanks, david, great trade !) to  add to 
my system with the specific intention of adding the linear fm mod to it.  this 
has been completed and works quite well -  *if you have any d.i.y.  interest, 
look at this mod*  - it is totally simple (and i simplified my  set-up a bit 
more by skipping the ac / dc coupling switch,i went with ac only) -  1 jack, 1 
pot and 1 cap.. since the pot value wasn`t specified, i used a 50k as  all 
the other pots in the module were 50k and it seems to work fine.
this one is a winner !  :^)
i`ve always liked the a-110, i consider it the "volks - vco" as it is  
adequate for most of my vco needs while remaining affordable and the lin fm mod  
gives it even more bang-per-buck !
i didn`t add the soft sync option as i don`t use sync that much but i may  go 
back and retrofit it - i did have a question about it though - it shows a  
jack and pot but what is the pot for - ? i didn`t think it would be needed  for 
a sync input - ? some sort of range control - ?
thanks !
best,
dave
 
 
 



************************************** See what's free at http://www.aol.com.


[Non-text portions of this message have been removed]