Doepfer

Please look at my message from June 04, 2007 for details.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Stu Grimshaw
> Gesendet: Donnerstag, 14. Juni 2007 15:47
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: A-155 - how to start on first step after
> reset?
>
>
> @ dieter: that's more or less what i'm looking at - bending the
> 160/161 to run from a
> subdivision of the input to the 160, i.e. one of the 160's
> outputs. if i can manage that,
> then i'd like to try to get two 161s running at different speeds.
>
> if i can reset them separately too - thanks for your post on this
> - then i can have them in
> different time signatures too.
>
> all of which would give me a pretty flexible sequencer combo for
> just 12TE, more so if i
> add a vcs to it.
>
> stu
> --- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
> >
> > > p.s. @ dieter: how about a bus connection on the 161 for a second 161
> > running from the same 160 ?
> >
> > That's easy. You simple need a 10 pin cable with 3 female
> connectors (one
> > for the A-160, one for A-161 #1 and one for A-161 #2).
> >
> > But I cannot see an application for this purpose. The outputs
> of the second
> > A-161 would be a 1:1 copy of the first one unless you use
> different clocks
> > or resets for the two units. But this requires some DIY as
> mentioned in one
> > of my former messages.
> >
> > Best wishes
> > Dieter
> >
>
>
>
>
> Yahoo! Groups Links
>
>
>