Doepfer

I think that although this is a nice idea each function would need to
load it's own program to instruct the module of it function.
 
As well as a variety of sockets and controls I suppose that you could
have a number of switches which boot a different function on the front
panel.
 
That would make the module more versatile.
 
 
 
David Salter
Senior Consultant
PSG 

Reuters Messaging: david.salter.reuters.com@reuters.net
(t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 

Get the latest news at Reuters.com <http://www.reuters.com/> 

 

________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of Tim J
Sent: 15 October 2007 15:06
To: doepfer_a100@yahoogroups.com; hardware@doepfer.de
Subject: RE: AW: [Doepfer_a100] Re: A188-9 AD/DA Module




Well, what was cool about the module was the fact that it was going to
be one module that would do various functions.

Dieter, maybe all you need to do is make the front panel a bit bigger
and add a couple more controls. 

Maybe your second option would be to make 'brain' modules with the
AD/microcontroller+memory/DA and 'faceplate function' modules with pots
and jacks specific to a certain modules' functions. There would be no
real electronics with these modules just jacks and pots. 

Maybe we should make a poll....

________________________________> To: Doepfer_a100@yahoogroups.com
<mailto:Doepfer_a100%40yahoogroups.com> > From: hardware@doepfer.de
<mailto:hardware%40doepfer.de> > Date: Mon, 15 Oct 2007 12:15:41 +0200>
Subject: AW: [Doepfer_a100] Re: A188-9 AD/DA Module>>> Will this module
have microtuning capabilities? Like freely>> programmable
quantization...>>>> Best regards>> Jari Jokinen> Maybe. This module is
still in the design state (though we already showed> the prototype
during some fairs). In principle with the hardware microtuning> can be
realised but the main problem will be the operation. It's nearly>
impossible to implement all functions (e.g. analog delay, CV delay, bit>
cruncher, digital sequencer, Hz/V <-> V/Oct converter,>
waveshaper/multiplier, microtuning) into one module with the same
controls.> To speak the truth: currently we d on't know how we should
continue. Probably> the module will be divided into several different
modules with the same core> (AD/microcontroller+memory/DA) but different
front panels and controls.> Best wishes> Dieter Doepfer> 

__________________________________________________________
Peek-a-boo FREE Tricks & Treats for You!
http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
<http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us> 

 


This email was sent to you by Reuters, the global news and information company. 
To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, 
except where the sender specifically states them to be the views of Reuters Limited.

Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company.
Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom
Registered No: 3296375
Registered in England and Wales



[Non-text portions of this message have been removed]